In today’s era one of the smartest investments you can make for your vehicle is the installation of dashcam. It provides reliable video and evidence in the case of an accident and it can protect you against insurance fraud.

When you are driving you need peace of mind which matters a lot. Poor dashcam hardware installation may cause more problems than getting solved.

Many drivers look for purchasing a high quality dashcam but they don’t focus on installation on dashcam as it affects if there is any loose writing, incorrect camera placement or even improper power connections, as these issues can reduce effectiveness or even damage your vehicle electrical system.

At Polar custom we have specialized in a professional dashcam installation team, we make sure your camera works exactly at the location when you need it the most. Here are some live signs dashcam may have been installed incorrectly and here are the ways we can fix each issue.

Why does professional dashcam installation matter the most?

The work of dashcam is to record the video as it has three types of camera i.e. front camera.Front and rear dashcam and 360° dashcam and if the installation is not in proper way then how it will work well. Professional installation matters most for these reasons.

● Record a clear view of the road
● It can operate without draining the battery of your vehicle
● Wiring are kept hidden
● Support parking mode when its needed
● Works in every condition whether its driving mode or its parking mode.

In Ontario, drivers are legally required to maintain a clear view through their windshield under the Highway Traffic Act. This is exactly why dashcam placement matters; it’s not just about video quality, but legal compliance too. Poor installation can affect both, which is why it’s worth investing in a professional setup.

Improper installation of dashcam wires

People are very conscious about perfection in every work whether its about installation or its about hiding the messy wires. Many other companies, especially in installation, leave cables hanging across the windshield,dashboard or near the steering wheel. While this unprofessional work doesn’t take more time,and time by time it looks unprofessional, it can interfere with airbags and as well as distracting the drivers. It also shows untidy interior appearance, risk wires becoming more damaging and lastly it increases the chance of cable disconnection,while driving sometimes it suddenly turns off and it results in not recording video.

At Polar Custom we fix as it is our routine work, our team makes sure that installation of dashcam especially its wiring remain properly hidden so that no one sees the untidiness of wires, it remains completely hidden and maintains fully safety compliance.

Improper positioning of camera

Make sure that the placement of the dashcam makes quality records footage which can help you in future. If the camera is installed too low,too high and off center then we will miss capturing the important data such as license plates, road signs and even traffic signals because they will not be captured correctly.

Most common mistakes while positioning dashcam:

● It blocks the windshield wipers camera view
● Rear view mirror blocks recording
● Dashcam reflection reduce image quality
● The camera captures the interior of your vehicle.

According to the Ontario Highway Traffic Act, Section 74, drivers must maintain a clear view through the windshield and side windows at all times. This means incorrect dashcam placement isn’t just a quality issue it can become a legal one too.

Our polar Custom team determines the ideal position and based on that we place your dashcam in the vehicle, we make sure that it adjusts the viewing angle to maximize road visibility while also minimizing glare and reflection.

What if the parking mode is not working properly

If your dashcam stops working or stops not recording it may be due to some common reasons some are mentioned below.

● It can be due to not properly installing a hardwire kit because in parking mode it mostly requires constant power from your vehicle battery and make sure that hardwire wire kit is properly installed in (BAT) and Accessory (ACC) fuse slots and make sure that ground wire is securely attached.

● Parking mode is disabled , open the dashcam settings in the mobile app and make sure that parking mode is enabled because in some models you can choose by yourself about motion detection or time-lapse modes.

● Low voltage protection is cutting power mostly in hardwire kits including battery protection that turns off the dashcam when the vehicle battery drops at certain level.

● Memory card issue microSD cards they can prevent recordings, its recommended that use a high endurance card by the manufacture of dashcams and format it regularly.

● Not getting proper source if you are getting it power from 12V cigarette sockets it will lose power when its turned off, and for true parking mode a hardwire or external battery pack is required.

You can test parking mode: here are some points:

● Park the vehicle and turn off the ignition

● Now wait for approximately 5 minutes because some dashcam needs time for entering in parking mode.

● After waiting walk in front of the car or you can gently tap the vehicle

● Check the footage and make sure that parking mode is activated. Your vehicle stays protected around the clock.

Polar Custom fixes because we are the professional for installation of dashcam in Brampton and we make sure that dashcam installation in parking mode, if we turn off our vehicle it automatically shifts into parking mode, it also protects vehicle battery more over it resume normal recording when driving begins.

What if Your Dashcam Footage Is Poor or Missing?

As we talk about the footage, if it’s missing our records are of poor quality so we have to make sure that every footage our Dashcam is recording we can use as our evidence when needed. Here are some examples we can follow and then record it properly.

● Clean the lens of camera properly make sure there is no dust or fingerprint or anything which has finger prints.

● Make sure that dashcam angle is adjusted in high recording resolution.

● Adjust the angle of camera to capture the recording of road only not the interior view of car.

● Check the firmware updates to improve performance and stability.

● Replace or repair the camera if the lens or image sensor is damaged.

Reasons for getting footage missing

● The memory cards can be full and might be older recordings have been overwritten.

● Chances for MicroSD card is faulty, corrupted or incompatible.

● Loop recordings can be disabled.

● The camera fails to start recording automatically when the vehicle is turned on.

How Polar Custom prevent from recordings issues

At Polar Custom we are professionally installed and we configure trusted dashcam brands like Jtronics, RedTiger and Azdome. Our technical team makes sure that your dashcam is securely mounted and its properly wired and fully configured so features like loop recording and other features like parking mode helps to capture high quality video from day one.

Why do people recommend Polar Custom for the Dashcam Installation in Brampton?

Polar Custom understands every vehicle has a different electrical system and same interior design. Our team is well-trained and during the installation, we tailored the process to ensure that dashcam performs reliably without affecting vehicle original wiring.

Installation process are as follow,

● Professional cable concealment

● Secure hardwire installation

● Front and rear camera setup

● Parking mode configuration

It’s not about whether you are driving a sedan, SUV, pickup truck or any commercial vehicle, we make sure that dashcam is installed safely and professionally.

Final Thoughts:

As we have discussed in detail in the blog , how effective it is for installation. Sometimes most advanced cameras can’t protect the recording if the position of the camera is poorly placed, loses power or fails to record at the right moment. Some signs,like exposed wiring, unreliable recording or non functional parking mode which often indicates that this installation needed to get professional attention.

In Polar Custom , we provide expert dashcam installation in Brampton with clean wiring, precise camera placement and secure hardwiring and thorough testing.

Whether you are making any new installation or fixing any old dashcam installation we make sure your work is done professionally.

Contact us today to give your vehicle the professional installation it deserves.

FAQS